Equipment introduction
This equipment is mainly used for manual welding of battery and nickel plated steel strip or nickel strip in cylindrical / polymer battery combination, and ensure that the welding tension between battery and nickel plated steel strip or nickel strip is greater than or equal to 30n. Constant current control, constant voltage control, combined control of constant current and constant voltage, the rising speed of welding current is very fast, which is most suitable for ultra precision welding.
Product parameters
Input voltage / power: single phase 220 V / 50 Hz Overall dimension L * w * H: 650 * 800 * 1260mm
Equipment air pressure: 0.4-0.6mpa
Working table size: 800mm * 650mm
Equipment weight: 50kg
Welding power supply: transistor power supply, 5000A / 8000A / 10000A optional
Welding head height adjustable size: 70mm
Suitable for nickel sheet: 0.1-0.3mm, more than 0.2 need to be grooved or convex point 72-75mm, width 100mm
Welding current: 0.25-9.99ka adjustable, precision 10A
Number of storable specification groups: 99
Inverter frequency: 125kHz
Welding speed: 0.3-0.6s adjustable
Number of welding pulse segments: 2
Display: LCD
Welding time: 0-9.99ms, adjustable, precision 0.01ms
Voltage setting range: 0-9.99v adjustable, precision 0.01V
Cooling time: 0-9.99ms, adjustable, precision 0.01ms
Control mode: constant current / constant voltage / current and voltage combination mode
Holding time: 0-9999ms, adjustable, accuracy 1ms
Slow down time: 0-9.99ms, adjustable, precision 0.01ms
Equipment display
